For some reason I can tell based on the event log reported by the modem, out of 4 upstrean channels , I only see 3 now. Midco tech checked and didn't find anything wrong. There are 4 channels seen on his test meter. The 4th channel has 40dBv but modem won't show it. Not sure if that would cause these events in the modem?. Does anyone would the possible cause of these ? Thanks
14:45:05
Thu Feb 10 2022 Error (4) Missing BP Configuration Setting TLV Type: 17.9;CM-MAC=xx:xx;CMTS-MAC=xx:xx;CM-QOS=1.1;CM-VER=3.1;
14:45:05
Thu Feb 10 2022 Notice (6) DS profile assignment change. DS Chan ID: 32; Previous Profile: ; New Profile: 1 2 3.;CM-MAC=xx:xx;CMTS-MAC=xx:xx;CM-QOS=1.1;CM-VER=3.1;
14:45:08
Thu Feb 10 2022 Critical (3) UCD invalid or channel unusable;CM-MAC=xx:xx;CMTS-MAC=xx:xx;CM-QOS=1.1;CM-VER=3.1;
14:45:09
Thu Feb 10 2022 Warning (5) REG-RSP-MP Mismatch Between Calculated Value for P1.6hi Compared to CCAP Provided Value;CM-MAC=xx:xx;CMTS-MAC=xx:xx;CM-QOS=1.1;CM-VER=3.1;
Upstream Bonded Channels
Channel Lock Status Channel Type Channel ID Symb. Rate (Ksym/sec) Freq. (MHz) Pwr (dBmV)
1 Locked SC-QAM 1 5120 35.2 50.0
2 Locked SC-QAM 2 5120 28.8 49.5
3 Locked SC-QAM 3 5120 22.4 48.8
↧